Industry News
-
WHY SHOULD THE SHUT-OFF VALVE HAVE A LOW INLET AND A HIGH OUTLET?
The stop valve, also known as the cut-off valve, is a forced-sealing valve and a kind of cut-off valve. According to the connection mode, it is divided into three types: flange connection, threaded connection, and welding connection. This type of shut-off valve is very suitable for shutting off o...Read more -
FILTER APPLICATION
1. Stainless steel filter Stainless steel filters are widely used in the pipelines of steam, air, water, oil, and other media; to protect various equipment, water pumps, valves, etc. of the pipeline system; to avoid blockage caused by impurities such as rust and welding ballast in the pipeline An...Read more -
PRINCIPLE REQUIREMENTS FOR FILTER SELECTION
The filter is a small device that removes a small amount of solid particles in the liquid, which can protect the normal operation of the device. When the fluid enters the filter cartridge with a certain specification filter screen, its impurities are blocked, and the clean filtrate is discharged ...Read more -
Common Faults And Elimination Methods Of Pneumatic Butterfly Valve
1. Before installation, confirm whether the product performance and medium flow arrow of the factory are consistent with the moving condition, and plug and wash the valve inner cavity. No impurities and foreign matters are allowed on the sealing ring and butterfly plate. Before cleaning, it is no...Read more -
What material is RPTFE?
Reinforced polytetrafluoroethylene, also known as modified polytetrafluoroethylene, is made of polytetrafluoroethylene with a certain amount of fillers, such as glass fiber, bronze powder, molybdenum disulfide, graphite, carbon fiber, etc., after high-speed mixing, molding, and then high-temperat...Read more -
Structure, function and installation method of check valve
1. Swing check valve: The disc of the swing check valve is disc-shaped and rotates around the rotating shaft of the seat channel. Because the channel in the valve is linear and the flow resistance is smaller than that of the lift check valve, it is suitable for large diameter occasions with low f...Read more -
Electric single seat control valve
The electric single-seat control valve is a top-direction single-seat control valve, which has the characteristics of simple structure, good sealing performance, large flow rate and reliable use. The effective and sufficient top guide system overcomes the vibration when the opening is small, and ...Read more -
What are the characteristics of pneumatic proportional control valve
The pneumatic regulating ball valve has accurate interception properties and control functions, and is suitable for various control occasions. It has the advantages of large rated flow coefficient, large adjustable ratio, superior sealing performance, compact structure, small volume, and horizont...Read more -
WHAT IS A FLOW CONTROL VALVE AND WHY DO YOU NEED IT?
Flow control valves manage the flow by decreasing or increasing the opening at the throttling point. This helps to determine speed of movement for the actuators. The simplest design for a flow control valve is a needle or longitudinal slot mounted in the pipeline and connected to a screw that adj...Read more -
WHAT IS A CHECK OR NON-RETURN VALVE AND WHY DO YOU NEED IT？
A DIDNLIK check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves. Check valves may be used as prefill valves, bypass valve...Read more -
THE BENEFITS ASSOCIATED WITH THE SANITARY VALVE
If a product is used by the industries or home widely, it instigates clearly about its advantages. However the benefits associate with the sanitary valves are summarized as here: Crevice free- The applications of the sanitary valves in the industry such as food and medical, bespeaks about the f...Read more -
WHY AND WHEN YOU SHOULD USE A SANITARY GRADE VALVE
There was the time, when each and every thing associated with home and industry needed human hands to complete the work. However the world has seen immense development. These developments have changed the face of civilization. There are machines for every task. The computer and internet has broug...Read more